Overview
This documentation describes the EtherNet/IP-specific software interfaces in the e!COCKPIT software that are used to configure and parameterize EtherNet/IP devices. It also considers examples of project engineering of EtherNet/IP networks on the basis of different scenarios with different devices and device roles (master/slave).
The essential functions for the configuration of EtherNet/IP devices are as follows:
- Selecting EtherNet/IP-specific connections for fieldbus communication
- Configuring the data points (if necessary)
- Mapping slave data points to variables of the master program
- Setting communication parameters for the connection
e!COCKPIT is an integrated development environment with seamless data retention for all automation tasks, such as configuration and parameterization of hardware, CODESYS V3-based programming, visualization for operation and monitoring and diagnostics to find and correct errors.
Devices from the product catalog can be arranged in the project by means of the network scan function or by dragging and dropping them. Fieldbus-specific device description files (e.g., EDS), device drivers and libraries allow systems from other suppliers to be integrated into the topology along with WAGO devices.
The network is designed by connecting devices to each other. Device parameters can be set on panels. Integrated configurators also support fieldbus-specific configuration of devices and the network.
Note
Observe other applicable documentation!
First read the e!COCKPIT manual to familiarize yourself with the software. Safe operation of e!COCKPIT is a prerequisite for understanding the following contents. Also read the product manuals for the products you use (e.g., fieldbus couplers, controllers and panels).