Setting the Device Address via the WAGO Safety Editor 75x

The device address can be set via the WAGO Safety Editor 75x if the device address “0” is set on the coding switch.

To set the device address and parameterize the F I/O module, use WAGO-I/O-CHECK with the WAGO-I/O-CHECK plug-in: WAGO Safety Editor 75x.

You can get the WAGO-I/O-CHECK software and the WAGO-I/O-CHECK plug-in: WAGO Safety Editor 75x (SEDI / 750-66x) at www.wago.com.